Some of the down pipes require fixing which I'll get onto but I cut away a section from the riser to size up an adapter for the 90mm down pipe…

^Thank you!
Just leaving the overflow stock.

Been to Bunnings and ordered the adapters which seem super cheap so I'm hoping the correct item was ordered. Seeing I've left this to the last minutes so the ICON…

Haven't got around to sorting that so It'll just be the standard intake unless I can sort something in the next couple days. I'll head to a pump shop this…

I've order the ICON leaf and debris controllers but will head back to Bunnings and order the adapters so hopefully they arrive in a week..
I'll also buy some more fittings…

How high is the lowest point of the tank's valve that supplies the pump? Can you use the location of the new low restriction inlet valve to connect to the…

With the sediment trap, say I put a 45 degree junction above where the pumps sits then a 100/50 taper, would there be any negative impact to the amount of…

I'll reach out to the owner and see if I can get the pump model number and do some more research. I'm still very keen on the pressure tank so…

Thanks for another detailed reply, I've already learnt a lot. That 80l pressure tank you mentioned, is that available to purchase, if so please let me know the details.
Also, with…

^^Just found another post and diagram from SaveH20 but I don't know how to quote.
So just for my understanding of the position of the 40 or 50mm low restriction…

There it is and again, thank you for your reply as it's greatly appreciated.
I just had a full reply typed but clicked on a photo and ended up losing the…

SaveH20, looking at your other in depth replies across the forum, you've delivered yet again. Thank you so much as it's greatly appreciated, I've got a bit to learn.
Once…

Hi All,
After reading through quite a few threads, I thought I would start my own hoping to help others in my position.
The house in question is purely fed by rain…