Cable size for 12v LED lights
Thanks for the replies! Appreciate the info. I will go with 1.5mm cable.
Levelling land, what are the costs? Please help!
It depends on a range of things like how steep the slope, if you are levelling the whole block or just enough to build, if there is rock and if…
Cable size for 12v LED lights
Hi all
Can anyone suggest what cable thickness is appropriate for these new 12v lights I will be setting up?
I have a 12v LED driver that plugs into the mains.…
Trowel size
Hi all
Quick question. What is the correct trowel size for 900x150mm floor tiles? The standards I can find only relate to square tiles and I'm not sure if it's about…
brick pillars
Thanks everyone.
Yes, a substantial pad footing is in place under the corners, where the posts sit.
The metal posts are galvanised.
Been delayed by wild weather in Sydney. Hoping…
brick pillars
Thanks Beetaloo. I will ask the bricklayer to do as you suggested.
The pillars are about 2.4m high and the metal posts quite stable. Would you also fill the…
brick pillars
Hi All
Have built a carport with a storeroom at the rear and an open front. The front is supported by a metal post (uni pier) in both corners. The posts…
Deck Advice!
Thanks for the help! Finished the deck before Christmas. Check out the photos:
http://timandkatiesrenovationdiary.blogspot.com.au/2015/01/my-first-deck.html
Bedroom - Before & After Photos
Hi there - just wanted to share some pics of our latest project, a bedroom reno for our 5 year old daughter.
Before:
After:
Our blog is at http://timandkatiesrenovationdiary.blogspot.com.au/2015/01/jasmines-room.html
Driveway cracks and sealer
Thanks Bashworth and Building Expert - appreciate the comment and explanations.
Re mapping cracks - These currently only are visible when the driveway is just wet. As it ages, would…
Driveway cracks and sealer
Also note the saw cuts are approx 15mm deep.
Driveway cracks and sealer
Thanks Building-Expert.
We had engineer specify requirements for an extension we did, including the carport slab. The carport slab and driveway were done in one pour (roughly 3.3 x 15m). The…
Driveway cracks and sealer
Thanks Stewie and Saint Mike.
I was here when the guys laid the driveway. No cement dust was used on the surface. The concrete mix was coloured all the way…
Driveway cracks and sealer
Hi All
We had a new concrete driveway laid about 5 months ago. Coloured concrete 32mpa, 120mm thick, reo throughout with saw cuts every 3m approx. After it had cured for…
Quick Bearer Span Question
Thanks everyone! Love this forum. I have found a product called Superlam which is a laminated hardwood product. It comes in 90x70 and is H3 treated.
Manufacturer recommends it for…
Quick Bearer Span Question
Thanks Adam. The land slopes and clearance is less on one side. Also a double brick perimeter wall.
Hardwood 100x75 seems to be a dollar cheaper actually. Or I could double…
Quick Bearer Span Question
G'Day - a quick bearer span question - appreciate any suggestions.
Deck on brick piers, 1m from the ground. I'm limited in height to 90mm bearers and 90mm joists.
Piers are…
Deck Advice!
Thanks Wobbly1. Very useful info. I have nearly got my plan together and will start the job soon. Photos to follow!
Deck Advice!
Hi Wobbly1 - thanks for the reply. I still want to go for the deck.
Any other takers? Would love some comments re timber size and pergola attachment.
Deck Advice!
Hi There
Iām planning my first deck & pergola and would love some help. Here are the questions I have ā below are pictures and details that should help illustrate what…
Before & after photos - Kitchen to Bathroom
Hey there
Just want to say thanks for the advice I've got from this forum - it's been great. On our blog (link below) are before and after photos from our…
Driveway sealer issue
Thanks qebtel - yes, I know it's doing what it was designed to. But it seems most new, sealed driveways allow water to soak in.
Would you be worried about water…
Driveway sealer issue
Hey guys. Sealed a new concrete driveway with Crommelin Diamond Coat. It looks beautiful but when it gets wet the water beads on the surface and is borderline slippery.
I know…