Curtain Ceiling Track Installation Advice?
With the last 20cm of the ceiling track on an angle, could it be as simple as:
1. Bending the track slightly to match the angle of…

I have a six meter deep storm pit in my backyard. I’m hoping to fix the garden edging sleeper to the edge of the pit. About 1m down. And have…

Yep. Will give it a crack tomorrow, my goal is to use the acid to break the bond and then flush it all out to the end about 40m.

Cheers. Will it affect the stormwater pipe at all?

I have a chunk of concrete set in a stormwater drain, directly below the grate. What is the best way to dissolve/remove it?
Currently stopping the minor flow of water. Cheers.

Can a plumber put a tap on a rain water tank which is full? Tank is similar to one in photo. Cheers.

Yep. Giving it a crack this morning. How close to the steel post you think?

Thanks mate. Much appreciated.

Thanks so much for your reply. How would you recommend chipping away at this, to not damage the sturdiness’s of it? Cheers

I’ve been digging up a path around my house. I’ve uncovered 4 of these, they had a mesh around them though. I need to bring them up to surface level…

Laying a slab down and wondering if I can concrete over the concrete holding in the steel posts?
Any help greatly appreciated.

We have an apparent "dead-end" water main running straight through our front yard and up to an old easement on the street behind us approx. 3m above our ground level.…

Picked up the blockage because it overflows out the top of the pipe at ground level. It’s still blocked. I’m only assuming it’s at the S bend.

There is a blockage in this S Bend pipe. Do I have to have an S Bend here, and what’s the best way to fix it?
Thanks.

This drain is blocked. Do I have to have an S bend here? What’s the best way to fix?

G’day,
This is the beginning of our irrigation system. It is currently 300mm below surface. I need to bring it straight up to the surface but unsure how?
What connections/fittings would I…

G'day,
I have 1.9m wide x 1.2m high glass panels for pool area. Do I use 2 spigots or 3?

G'day,
I have 1.9m wide x 1.2m high glass panels for a pool area. Can I use 2 spigots or would I have to use 3?
Cheers.

G'day,
I'm trying to work out my Rain 2 Main and exactly what it does already. I have attached photos. I understand when turned on, it puts rain water in to…

I need to use this door panel as a window to replace an existing door. Because council won’t approve my pool area with a door.
How do I hinge/attach it on…

How many spigots should I be using per panel? I have glass panels for a pool fence - 1.96m x 1.2m each.

Thanks mate. We’re doing a coping paver around the pool, then concreting the remainder of the pool area.

What is the difference between honed and exposed?
Will be doing in a pool area. Thanks.

I have a 600mm glass hinge panel and 800mm gate panel. It will be perpendicular to a colourbond fence.
Due to the hinge panel not being able to hold the…

I’m buying a 2nd hand glass pool fence, however I need the gate to swing a certain way.
Can any glass gate panel and latch be switched to swing the…

What’s the best way to get these out?
Or do I try and hammer them down?
Any help will be greatly appreciated!

G'day,
Our backyard ground level is 2.4m above our neighbours ground level (2.4m retaining wall). We're putting a pool in 2.8m away from boundary line. 1.69m deep. Will we need concrete…

G’day legends,
I’m putting in terrazzo tiles and just a regular black pool fence.
Can we lay the tiles after the fence is done? Or better to do it beforehand?
Only reason…

G’day,
Inside our pool area, council have advised that we have to remove those doors in the picture by either bricking it up or making into a window.
Cheapest option:
- Replace…

I built this polished concrete dining table last year and am about to do another one for my parents outdoor area. However, it weighs at about 250-300kgs. I’m looking for…