Hi guys,
I am looking at getting downlights installed in my newly renovated main room, WIR and ensuite (soon to be renovated). I thought that while I get these rooms done,…

Hi guys,
Attached has more measurements.
Not sure if there would be enough space to have slightly bigger an "walk in " shower?
Cheers,
Robbie

The size of the ensuite is:
The length (shower and vanity) side is about 2.5m and the width is about 1.75m

Hi All,
I hope you all had a great weekend?
I am looking at starting a bathroom renovation in the coming weeks, but just wanted to get a full understanding of the…

i just found out that EOP doesnt work over different circuit breakers. As my lounge (where modem is) is on a different breaker to the kitchen, it wouldnt work.
My main…

Thanks guys!
Hi guys,
With regards to using the powerline option, I did some tests on power supply / circuit of the shed…
My electricity board had a few switches Mains, air…

I looked at a few Netgear options, but i was worried that the signal wouldnt get through a metal shed?
The other option would be to run your internet through the…

Hi guys,
I was wondering if any of you have had experience in trying to get wifi signal into your outside shed?
Our shed is probably about 20 meters away from…

Hi guys,
I was wondering if you are able to purchase insulation batts per meter?
I came a few meters short while lining my shed and don't really want to purchase a…

Hey!
I will get some pictures tonight and post them
So far, i have completed lining 2 of the 4 walls. I ended up using vertical Zinc…

I think ill go with Foilboard (25-30mm), as mentioned above, with a 10-20mm gap would be a good idea.. i think Foilboard works out cheaper than polystyrene (which i didnt…

Thanks, I can keep a 10-20mm gap between the Polystyrene.
Does 50mm Polystyrene only have a R1 value? I thought it would be higher than that?
I think i read…

Hi guys,
I have started lining / insulating my shed walls and I am going to be doing the roof too. The next thing I need to think about is…

Due to the low roof in the shed (2100-1950mm), I dont want to waste further space by using ceiling batts, so I'm looking at using 30-40mm polystyrene, with an additional…

Earthwool do offer a foil backed "space blanket", but it probably costs about 25% more in price, but reduces your R rating from 2 too 1.8. Not sure if that…

Hi guys,
I am going to be starting with me my shed to "teenagers retreat" conversion this weekend. I have decided to go with 7mm plywood attached to the existing…

Hi all,
I am going to start with the lining of my shed walls this weekend, really excited.
Decided to go with 7mm ply, attached to the existing frame, which…

Thanks!
How do you think polystyrene (on the roof) would help in the winter?

would i still need to try put in some anticon?

Thanks! Can it be attached directly to the roof of a shed?

Hi all,
I am looking at a putting some basic lining / insulating my shed roof.
The height of the shed roof is quite low, 210cm dipping to 195cm.
In order…

Any ideas for insulating the roof?

definitely no plans to rent it out.. purely for a teenagers retreat / visitors sleep over room...

Would the vertical steel ceiling battens hold up plasterboard?

Thanks, best idea ive heard so far so I don't need to bother fastening the sheets to a top / horizontal rail, just fasten to vertical rails spaced at…

thanks, so simply fastening plywood boards to the 3 horizontal beams is not an option?

With regards to lining the shed walls, i have 2 options in mind:
1: Fasten 7mm ply wood sheets (2400mm x 1200mm) to the 3 wall rails (top middle and bottom).…