Home
Pros
Forum
  • About
  • Register
  • Contact
InboxSent
MembersPros
WatchingStarredHistory
navarch
56 Posts
navarch
56 Posts
Loyal Member

Follow
56PostsMost Active Topics

navarch

Joined 5 February 2013
Loyal Member
Following
Followers
11 years11 yearsnavarchnavarch posted:
PFC Beam Question

180 PFC ; Z=157e3 mm3.
Two of these connected appropriately should give you more Z than a single 230PFC and should be fine for your job.

11 years11 yearsnavarchnavarch posted:
PFC Beam Question

hi beechworth,
I am an engineer and its not just the moment of inertia (MI) that matters. What actually matters is the Z (section modulus), which is MI/y.
2x 150 PFC would…

11 years11 yearsnavarchnavarch posted:
Confused with Tile Selections - Need advise

Thanks a lot for your comments guys.. really appreciate your input. I think we will go for the darker tile as that is less of a risk with that going…

11 years11 yearsnavarchnavarch posted:
Confused with Tile Selections - Need advise

Good idea regarding the grout colour.. Personally do you prefer the light tile with patterns "Syraka" or the dark coloured tile ?
Another picture of Syraka laid below. The one we…

Confused with Tile Selections - Need advise
11 years11 yearsnavarchnavarch posted:
Confused with Tile Selections - Need advise

Just bumping my topic.. Any advice regarding this would be much appreciated.

11 years11 yearsnavarchnavarch posted:
Confused with Tile Selections - Need advise

Hi everyone,
I am in a predicament with our tile selection to our living areas. We have narrowed our sections to two one is a 600x600 Syraka (Cream one with some…

11 years11 yearsnavarchnavarch posted:
Leanne's Baldivis Build - Deck Area Update

I'd like to ask the same question as jaymak.. How much and where from? The Gate looks awesome...

11 years11 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

Hi everyone,
I am new member but having spend considerable amount of time in the past few weeks scanning through this forum I am a big fan. ::

11 years11 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

Yes.. Its slowly moving along.. Hopefully they don't stuff up things during fit outs etc. We got lock up invoice on Friday.
Went during the weekend to have a look…

11 years11 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

White set was completed yesterday and it is starting to feel more like a house.. Some pic below..
View From Alfresco
Living/ Dining Area
Theater Room Window
Bedroom-3 in evening glory

11 years11 yearsnavarchnavarch posted:
Site boundaries

I am not sure about all builders but I think most of them charge for a survey and re-peg anyway which is included in the site costs.

11 years11 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

Thanks guys.. Good luck with your builds.. :)

11 years11 yearsnavarchnavarch posted:
Leanne's Baldivis Build - Deck Area Update

Wow your facade looks amazing.. Great color choice..
2

11 years11 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

I haven't been updating my thread for a while. After about 9.5 weeks of delays our bricking started and has been progressing well after that. Our internal walls had the…

11 years11 yearsnavarchnavarch posted:
A custom build in Hammond Heights - walls started.

Hey, how did the prestart go for you? We have finally started and going well. Just didn't get time to update our thread.. Will have to do that..

11 years11 yearsnavarchnavarch posted:
cost to upgrade from 2.7m to 3.0m ceiling

I think we were charged around 6.5 k from memory..

11 years11 yearsnavarchnavarch posted:
A custom build in Hammond Heights - walls started.

That's great news.. All the best for the prestart..

11 years11 yearsnavarchnavarch posted:
Recommendations for a Sparky SOR, Perth

Could anyone recommend me a sparky who is willing to work south of the river near Cockburn area. I would need them to do our downlights (about 40), couple of…

11 years11 yearsnavarchnavarch posted:
How often do you visit your site?

I try to visit every day or every second day to see if anything exciting has happened..

11 years11 yearsnavarchnavarch posted:
Aveley-Dale Alcock - Moving In :)

We are building SOR in Aubin Grove. Our bricking got delayed by about 10 weeks as well.

12 years12 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

We are hoping so too.. when quizzed about the delays they blamed it on rain..

12 years12 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

Just been informed by our SS that they 'hope' to have the brickwork team at our block by the end of next week.. 8.5 weeks from slab down..

12 years12 yearsnavarchnavarch posted:
Building again (NOR WA) - Choosing a builder..

Best of luck with choosing your builder.. We are building with C*llier Homes and so far they were really good with modifying the design, prestart and their paperworks etc. But…

12 years12 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

Thanks for the update from everyone. Looks like what we are facing is a genuine delay and not been taken for a ride by our builder.. Wondering what we can…

12 years12 yearsnavarchnavarch posted:
Building with C*llier in Aubin Grove, WA - Lockup

Is it just us or anyone else here in Perth experiencing delays with their brickwork. It has been nearly 6 weeks from when the slab was laid. Builder has advised…

12 years12 yearsnavarchnavarch posted:
gypsum ceiling installed before metal roof is installed

Intrestingly I had this question as well.. Our eaves and garage are nominated to be hardieflex material which are weather resistant etc.. But I have seen builders installing them on…

12 years12 yearsnavarchnavarch posted:
A custom build in Hammond Heights - walls started.

Great looking plans.. Good to see one more C*llier build on the forum.. All the best with your building.. If you don't mind could you please PM me the indicative…

12 years12 yearsnavarchnavarch posted:
Can anyone tell me anything about C*llier Homes (Perth)?

Hi arauch,
We had similar good experience like yours during the pre-construction phase. A bit too early to say anything about construction as we have not started our brickwork yet.
We never…

Most Active Topics

PFC Beam Question
12 Posts
Joined homeone
5 February 2013

Australia's largest home building and renovation
community with over 1.8 million posts

Home
Pros
Forum
Start a new topic
About
Advertise
Contact Homeone
Articles
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2024

Australia's largest home building and
renovation community
Homeone
About

Terms
Privacy

Follow homeone on FacebookFollow homeone on Twitter
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2024