dan_walls posted:Is 2 x 150mm overflow sufficient for 1 x 225mm inlet in a rainwater harvesting system?
It’s an elevation drop from the buried down pipe. Sorry for the confusion. It would be another 2.5 meters to top of down pipe.
dan_walls posted:Is 2 x 150mm overflow sufficient for 1 x 225mm inlet in a rainwater harvesting system?
In answer to your question, I would like to try the installation myself (at least around the tanks - not the downpipes etc.) or perhaps in close concert with a…
dan_walls posted:Is 2 x 150mm overflow sufficient for 1 x 225mm inlet in a rainwater harvesting system?
Thanks SaveH20 for such a detailed reply. I appreciate it.
There's a bit to digest in that and I have some follow-up questions to help my understanding if thats ok?
First the…
dan_walls posted:Is 2 x 150mm overflow sufficient for 1 x 225mm inlet in a rainwater harvesting system?
Sorry - I meant to include those. 1:20 ARI is 220mm/h and total roof area is 900m2. There are actually two x 225mm each one going to a separate tank.…
dan_walls posted:Is 2 x 150mm overflow sufficient for 1 x 225mm inlet in a rainwater harvesting system?
Hello,
I have been given a design with a 225mm pipe coming from a house down to a tank on a lower level (3-4m lower), about 30-40 meters away. Due to…
dan_walls posted:Underfloor heating in sub-tropical climate (Brisbane, QLD)?
Has anyone had any experience with underfloor heating in Brisbane or a similar sub-tropical area? Specifically with in-slab hydronic on polished concrete floors, but any heating type would suffice.
I'm just…
dan_walls posted:100% Pure New Zealand. A Kiwi build journey
Thanks powersquad - you're a wealth of knowledge.
It looks like Wood X is exactly what we are looking for. I like that it…
dan_walls posted:100% Pure New Zealand. A Kiwi build journey
Hi powersquad,
We've just come back onto the forum and I found your posts and build journey by searching for 'accoya' and 'sioo:x'. Firstly,…
dan_walls posted:How to find quality tapware on the net? Della Francesca?
Thanks! We went Methven and ten years later they have turned out to be a great buy. Very happy with these taps.
dan_walls posted:Plasterboard / Gyprock expansion joints in stairwell
What are the options for covering expansion joints in plasterboard in a stairwell. The builder currently is using continuing the skirting board around, however it doesn't quite line up with…
dan_walls posted:How to find quality tapware on the net? Della Francesca?
Has anyone heard of Della Francesca? Are they a good brand for tapware? I'm looking at buying this kitchen tap:
http://www.factoryfast.com.au/p/wels-basin-mixer-tap-faucet-kitchen-laundry-sink
What are some tips to make sure I buy quality tapware?
-…
dan_walls posted:Looking for 2400h x 3600w Stacker door in FSSS ?
Hi,
I'm looking for an aluminium stacker door in FSSS configuration with 920mm panels (3600 wide).
Does anyone know some good suppliers? I'm in Brisbane, QLD.
Thanks.
dan_walls posted:Looking for 2400h x 3600w Stacker door in FSSS ?
Hi,
I'm looking for an aluminium stacker door in FSSS configuration with 920mm panels (3600 wide).
Does anyone know some good suppliers? I'm in Brisbane, QLD.
Thanks.
dan_walls posted:Building Materials Price Guide?
Does anyone know of any building materials price guide (relevant to QLD) that are available?
Being a first time home builder I am struggling to understand the cost impact of the…
dan_walls posted:Anyone had experience with Build4Cost (in S.E.QLD)?
Hi,
Has anyone had any experience with the Build4Cost system here in south east QLD?
Or can you see anything to watch out for in their system as described here:
http://www.build4cost.com/comparison_1.html
http://www.build4cost.com
Kind regards,
Dan.
