Home
Pros
Forum
  • About
  • Register
  • Contact
InboxSent
MembersPros
WatchingStarredHistory
barnsey
12 Posts
Junior Member

Follow
12PostsMost Active Topics

barnsey

CENTRAL COAST N.S.W
Joined 14 January 2007
Junior Member
18 years18 yearsbarnseybarnsey posted:
Floorboards - What Finish?

Hey how are you today :)
I used synteko products in my early years as a floor sander and used to buy all of my materials thrugh…

18 years18 yearsbarnseybarnsey posted:
Floorboards - What Finish?

two pack is fuemy while wet, once dry and the house is vented and aired out for about an hour all fuems are gone. two pac these days has had…

18 years18 yearsbarnseybarnsey posted:
Floorboards - What Finish?

Having young children I would recomend using two pack polly in gloss finish.
I know others will say to go semi gloss or satin or even tounge oil but in my…

  ⋅  1
18 years18 yearsbarnseybarnsey posted:
Timber flooring: Floor Prep Cost

Is this floor quoted to lay over a concrete floor or partical board floor.
I do
Blackbutt Standard Grade
80mm x 19mm Solid Tongue & Groove Timber Flooring
Supplied, Laid,…

18 years18 yearsbarnseybarnsey posted:
New Home Inspections

Im with Luke on this one.
but if you do decide to go ahead with the inspections from this company make sure they are licenced inspectors and can show you there…

18 years18 yearsbarnseybarnsey posted:
Different types of floorboards

hey Luke
we secret nail all our floors. I even secret nail the wide boards as I find it easier to lay without having to clamp them up, then i…

18 years18 yearsbarnseybarnsey posted:
Different types of floorboards

if you have young children, I wouldn't recomend floating floors, most floating floors are plywood with a timber veneer and when damaged it is a risky exersize to resand them…

18 years18 yearsbarnseybarnsey posted:
Does anyone know a better brand of polyurethane finish?

the new two pack polly's that i use and made by toby's are all solvent based and have come along way from the early years,wattle 7008 used to yellow up…

18 years18 yearsbarnseybarnsey posted:
newby here from central coast n.s.w

Hi Luke
the floor was done for a customer 245 square metres all up. timber blinds were fitted to the whole house only a couple of days after they were sanded,…

18 years18 yearsbarnseybarnsey posted:
newby here from central coast n.s.w

Hi all
my name is Brett but my freinds call me barnsey, i live on the central coast N.S.W
Im a floorsander polisher and have been sanding floors for 25 years.…

18 years18 yearsbarnseybarnsey posted:
Tung Oil - have you had it? Would you have it again?

tounge oil gives a nice natural finish, but what most floor sanders don't tell you is that it is also high maintance, tounge oil needs to have 2 to 3…

18 years18 yearsbarnseybarnsey posted:
Does anyone know a better brand of polyurethane finish?

Iv been using toby's coatings for over twenty years, as a professional floorsander i use there two pack finish, dry time is approx 8 hours and you will get 8…

About

Introduction

Hi all
my name is Brett but my freinds call me barnsey, i live on the central coast N.S.W
Im a floorsander polisher and have been sanding floors for 25 years.…

Occupation

floorsander polisher

Interests

hotrods custom cars

Joined homeone
14 January 2007

Australia's largest home building and renovation
community with over 1.8 million posts

Home
Pros
Forum
Start a new topic
About
Advertise
Contact Homeone
Articles
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2024

Australia's largest home building and
renovation community
Homeone
About

Terms
Privacy

Follow homeone on FacebookFollow homeone on Twitter
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2024