Have you ever considered hiring a professional gas plumber or technician to fix your hot water system? Hot water systems are important because they reduce our energy bills, save us time and conserve resources. They also ensure that no cold showers for days at home.
However, repairing hot water systems is tricky. The main problem is that it requires expertise and experience.
Hiring a professional plumber or technician is highly recommended if you have no previous knowledge regarding plumbing.
The following tips will guide you through how to repair your own hot water system.- Check the Thermostat Setting
Before starting anything, first, check whether the thermostat setting is set properly. Most people don’t realize that even though their hot water system has been working fine all the while, this could lead to serious problems later on. For example, if the thermostat setting was set to 28 degrees Celsius, but the temperature of the hot water is 50 degrees C, then there is something wrong with the hot water system.
- Turn Off the Gas Connection
Once you have checked the thermostat setting, turn off the gas connection before any further work begins. It is possible that a leak has occurred due to the water pressure. You may notice a small amount of water dripping from places like faucets and shower heads.
- Test Your Water Supply Pressure
After turning off the gas supply, test the water pressure by using a water pressure gauge. Ideally, it should be around 10-15 PSI (pounds per square inch). However, if the value is lower than 5 PSI, then you need to either increase the size of the pipes supplying the hot water or install an additional booster pump.
- Remove the Back Cover of the Tank & Drain Line
If your hot water tank isn’t visible, remove the back cover using a screwdriver. Thereafter, drain the water in the tank. Then take out the drainage line and wash away dirt and debris.
Use a pipe cleaner to clean up the drain pipe, especially if it’s clogged. This helps prevent future blockages.
If the filter needs replacing, remove the old one and get a new one. Ensure that you buy a good quality filter as cheap ones can cause permanent damage to your hot water system.
- Adjust the Heater Settings
To adjust the settings, simply go into the control panel of your hot water system. Make sure that you choose the correct type of heating element for your hot water system — gas or electric.
- Start Using the Hot Water Again
If everything went according to plan, you should now have a well-functioning hot water system. Use it as usual until you notice any signs of trouble.
- Call Professional Plumbing Services
If you aren’t satisfied with the results, it’s advisable to call a professional plumber or engineer to help troubleshoot the issue.
To avoid any issues, you need to follow up on installation. Get in touch with the person who installed the hot water system or called the professionals in case there are any questions. Also, ensure that they give you detailed information about how to maintain and fix the hot water system.
Different types of hot water systemsHow do the different types of hot water systems work? What are the advantages and disadvantages? How do you know if your current hot water system is working properly? There are many reasons why a hot water tank may not be heating or cooling water.
To help with this, we have provided a list below showing some of the common issues that can occur within a hot water system. It will also show you what the different parts of a
hot water system Sydney Broad are and how they work together.
Remember: when it comes to hot water systems, don't DIY! If you want to learn more about how to repair hot water systems, keep on reading.
Hot water systems are usually very reliable during normal operation. However, if there are problems, they often fail silently. They are best suited to homes that use a lot of hot water, such as those that shower, bath or cook regularly.
- Electric hot water systems
Electric hot water systems offer the convenience of being able to turn on the hot water heater instantly at the tap. They tend to be slightly less efficient than natural gas water heater systems but provide a better level of reliability.
- Heat Pump hot water systems
Heat pump water heaters are highly efficient devices that can dramatically cut electricity bills by reducing reliance on the main power supply. They also generally enjoy higher levels of reliability than other methods.
Solar panels hot water systems use a solar energy source to heat water stored in tanks. The system then transfers water heating directly from storage tanks via a network of pipes to taps throughout the house.
Storage tank systems store excess energy and transfer it back onto the grid every day. This helps keep running costs down and provides an additional source of backup energy.
Flow hot water systems operate on the same principle as storage tank systems, except rather than storing energy, they use large amounts of water to create heat. A flow system uses moving water to circulate through coils inside the hot water tank, which increases its capacity and therefore energy efficiency.
You must have your hot water system repaired only by a professional to avoid any potential problems.