Things To Consider During Your Next Boiler Installation

Has your old boiler stopped performing at its optimum, leading you to seek an alternative solution in the form of a brand new one? Before you dive right in and make your selection, it is important that you first take a number of points into consideration. This will ensure that you are making the right decision for your home and its needs, as making the wrong choice could prove to be disastrous.

So, what should you consider when looking at a new boiler?

• Your budget (including grants, loans and other schemes)
  You may not have realised this, but there are plenty of schemes available depending on your circumstances. Some will offer you a small rebate if you upgrade from an old, inefficient boiler to a new, environmentally friendly one. Others will offer you money towards a purchase if you earn below a certain threshold.
• Finding an installer (and getting 3 quotes)
  You should always aim to get 3 quotes for the installation of a new boiler in your home. This will give you a good idea of how much the work is worth and will help to ensure that you aren’t ripped off. Each installer will have favourite brands and even preferred methods of undertaking the installation, so keep this in mind.
  
• Your current system (including its layout, design and condition)
  Did you know that your current situation could have a large affect on the cost of the installation? Moving a boiler can add a considerable expense to the project, as rerouting pipework can often be quite tricky. If you need to upgrade the system, this can also add a considerable expense, as all sorts of aspects might need to be changed.
  
• Your hot water demand (for bathrooms, ensuites, etc)
  You may not have realised this, but even the lowest output of boiler can, if installed correctly, cope with up to 14 radiators. You should also look at the number of bathrooms that you have – a larger unit will be able to cope with 2 showers running simultaneously, whilst a smaller one will not. Will lots of taps be running at the same time?
  
• The current water pressure of your system
  Before you begin looking at boilers, it is important that you measure your mains water pressure to determine what will work and what won’t. You might not have enough pressure for a particular brand or model, even if you’ve got your eye on it. If you aren’t sure how to check this, your water company should be able to.
  
• Powerflushing (or simply flushing) your system
  There is actually a big difference between powerflushing your system and simply flushing it. Powerflushing involves much higher pressure and circulates fresh water filled with special chemicals around the system. Normal flushing, however, is a requirement when a boiler is installed, where cleanser and inhibitor is added.

If your boiler hasn’t been performing as well as you would like, it is important that you have considered each of the above points before running out and buying a new one. A lot of mistakes can be made when purchasing these units, so you must make sure that you have made the right decision for your needs. We hope that we have helped you make a final decision!